Tubular Solenoids

As other linear solenoids Tubular solenoids are on/off type actuators and develop force in one direction when energised. The return force must be provided externally, e.g. by a return spring. Tubular solenoids are optimised for long strokes.

In most of the sizes both push and pull versions are available. It is possible to incorporate a permanent magnet for a latching function.

products / tubular solenoids

Tubular solenoids provide a fairly flat force stroke characteristics due to their tubular shape and their plunger geometry; they are well suited for applications asking for long strokes but not highest forces.

The most important characteristics of our Tubular Solenoids are:

stroke up to 30mm (depending on type)
optimised for long strokes
holding force up to 80N (in endposition, energised)
high life time: up to >30 million cycles
pull and push versions
custom versions available, including latching types (permanent magnet)

Model	stroke mm	Holding Force N		Dimensions mm	weight g		Data- sheet	Drawing 3D
-L = pull -H = push		10% ED*	100% ED*	D x H	overall	plunger pull / push	.pdf	.igs
133-L	3	5	0.9	13 x 12	15	4
133-H	3	5	0.9	13 x 12	15	2
130-L	12	7	3	13 x 27	24	5
130-H	12	7	3	13 x 27	24	4
170-L	12	7	3.5	17 x 27	15	5
170-H	12	7	3.5	17 x 27	15	4
190-L	13	18	8	19 x 40	82	20
190-H	13	18	8	19 x 40	82	16
253-L	12	35	15	25 x 30	125	32
253-H	12	35	15	25 x 30	125	19
250-L	14	38	22	25 x 51	188	44
250-H	14	38	22	25 x 51	188	35
320-L	18	70	35	32 x 58	299	54
320-H	18	70	35	32 x 58	299	53
380-L	30	80	55	38 x 64	497	95

xxx-L = pull, xxx-H = push
ED is duty cycle as a %-value, the additional limitation is the max. on time per cycle!

Tubular Solenoids General Information