Geeplus Europe Limited
We specialise in design and supply of advanced
actuation devices for your next generation products.
products / electromechanical clutches
Wrap spring clutches are used in applications where several axis need to be engaged/disengaged and synchronised
to a rotating main drive axis. By using gears other speeds can also be realised. Typical examples for applications are paper transportation
in printers, copiers or money handling and money sorting equipment.
EC series wrap spring clutches are powered from a 12 or 24Vdc power supply and only require very small amount of power of just a few watts to energize.
There are also passive slip clutches available to limit the impact of the rapid acceleration!
Special features of wrap spring clutches:
- very dynamic response
- one direction of operation
- synchronisation of two axis
- torque up to 8.5Nm
- standard windings for 12 or 24Vdc
- very compact
- no adjustment needed
| Model | Torque Nm |
Direction W |
Shaft Diameter mm |
Ø x H mm |
Voltage W |
Power W |
| EC15 | 1.7 |
CW / CCW |
6 / 8 |
30.1 x 26.8 |
12 or 24 |
2.5 |
| EC25 | 2.8 |
CW / CCW |
6 |
30.1 x 26.8 |
12 or 24 |
2.5 |
| EC25LL | 2.8 |
CW / CCW |
6 |
30.1 x 26.8 |
12 or 24 |
2.5 |
| EC30LL | 3.4 |
CW / CCW |
6 / 8 |
33.3 x 26.8 |
12 or 24 |
2.5 |
| EC30XP | 3.4 |
CW / CCW |
6 / 8 |
33.3 x 26.8 |
12 or 24 |
2.5 |
| EC75LL | 8.5 |
CW / CCW |
10 / 12 / 15 |
44.5 x 38.1 |
12 or 24 |
6 |
| EC20CB LL | 2.2 |
CW / CCW |
6 / 8 |
33.3 x 35.3 |
24/12* |
14 / 3.5 |
Wrap Spring Clutches Catalogue part
